Below is a step-by-step guide on how to connect the Zebra or Bixolon label printer to your POS system via the Flipdish Portal.
Instructions:
Feed print on the device to get the network IP address:
For Bixolon - Hold down the feed button until the LED changes and then on the blinking green led press the button again to get the full status page.
For Zebra ZD421 - Press and hold the FEED and CANCEL buttons simultaneously for two seconds, then release the buttons.
In the Flipdish Portal, navigate to Properties → select your property → go to the Devices tab → choose POS Station → click Label Printers → and select Add New Printer.
3. Configure the printer settings as follows:
Note: Set the label template size to match your paper roll’s dimensions.
3. After saving the printer configuration, assign it as a Kitchen Order Ticket (KOT) printer:
Note: It is important to reboot your POS system for changes to take effect.
To learn more about Flipdish's products or how to grow your online business enroll for FREE in the Flipdish Academy here: http://academy.flipdish.com/