Learn how to set up your K2 Mini Kiosk by reading the guide below.
Unboxing
Step 1:
Inspect the box and contents for any damage.
Please escalate to the Flipdish team ([email protected]) if there is any damage to the device or the box itself after it has arrived.
Step 2:
Each K2 Mini Kiosk should come with the following parts:
K2 Mini Kiosk with Flipdish branding.
Correct power plug for your country.
Transformer.
80mm Thermal printing paper.
Card reader - M2 Card Reader or WisePOS E for US regions.
Charger for the card reader.
Mount for the card reader.
Pole Stack & Grip Plate
Flipdish Branded QR code cards
Order here sign
Velcro pads
Examples below of an unpack of a K2 Mini Kiosk with WisePOS E Card Reader Accessories.
Step 3:
Remove all parts from the box and check the screen to make sure no damage before set up begins.
There must be Flipdish branded stickers on both sides of the K2 Mini Kiosk. Please escalate to the Flipdish team ([email protected]) if this branding is not in place.
Step 4:
Open the panel on the rear of the K2 Mini Kiosk.
Connect the power cable to the appropriate port at the back of the Kiosk.
Connect an ethernet cable to the appropriate port.
This is recommended for the best internet connectivity.
When the device is plugged in please press and hold the power button to turn on the device.
The power button is on the side of the device.
Step 5:
The screen will power on.
Press the start setup button.
Step 6:
Select language.
Press Next
Step 7:
Select Country and Timezone.
Press Next
Step 8:
For this step, you will need your internet network information.
Network Requirements
Make sure your internet network meets the minimum requirements to operate Flipdish services on Kiosks.
Upload and download speed 1MB
Latency less than -100.
No firewalls / special security protocols and whitelists blocking access to the network
Wired Ethernet Cable Option (Recommended for more stable connection)
Make sure your ethernet cable is connected to the back of your Kiosk and to an internet-connected router in your building.
On the menu on the kiosk, select Ethernet from the tab at the top.
Enter your network details.
In most cases, the automatic IP configuration is the best option.
For cases where a company or store location has special security with specific IP addresses and security protocols setup, you may need to select manual configuration and enter more settings such as IP address and security passwords. Discuss this with your network administrator.
WIFI Option
Ensure you have the correct WIFI name and password for the desired network.
Select the WIFI tab on the Kiosk Menu.
Select your WIFI network from the list of networks found.
Enter your password and press Connect.
Step 9:
On the screen below, press the Start Config button on the screen
Then wait for the device to download the required apps.
Step 10:
The system will download all apps and updates.
When it is finished, the screen below will appear.
Press Enter The System button.
Step 11:
The kiosk will prompt you to load the paper into the printer.
You can either load the paper now or press OK and load the paper later.
Step 12:
To load the paper, open the door on the front of the Kiosk.
The printer can take 58mm or 80mm paper.
See the instructions below for both.
58mm Printing Paper