Skip to main content
All CollectionsSettingsKiosk Settings
Enable Location Services on Your Kiosk
Enable Location Services on Your Kiosk
Updated over 7 months ago

Steps and Video of how to enable location on the Flipdish Kiosks settings by Model

T2 15'

  1. Hold the power button

  2. Select Exit Kiosk

  3. Enter PIN code '1234'

  4. Locate and open 'Settings'

  5. Scroll down to 'Location' (Under 'Personal')

  6. Toggle the option 'Location'

Kiosk_T215.png

Video:

22' & 32'

  1. Place your finger on the bottom left of the screen and drag it to the center of the screen.

    This part might take several attempts (depending on the Kiosk user)

  2. Tap on 'Passcode'

  3. Enter code '2020'

  4. Select 'Open System Settings'

  5. Locate and open 'Location'

  6. Location should be enabled

  7. Select 'Back / <' until you reach the Flipdish Kiosk App

22_Kiosk.JPG
32_kiosk.JPG

Video:

K2 24'

  1. Press the 2 side buttons

  2. Pull the door/lid

  3. Press and hold the round power button on the left-hand side of the printer (Above the switch).

  4. Select 'Exit Kiosk' on the screen

  5. Enter code '1234'

  6. Go to Settings on the device

  7. Go to Location

  8. Location should be enabled

  9. Go back to the home screen

  10. Open the app 'Kiosk'

24_Kiosk.JPG

Video:

Did this answer your question?