Skip to main content
All CollectionsSettingsKiosk Settings
Restore Factory Settings on Your Kiosk
Restore Factory Settings on Your Kiosk
Updated over 4 months ago

Steps and video of how to restore kiosks to Factory Settings by model

T2 15'

  1. Hold the power button

  2. Select Exit Kiosk

  3. Enter PIN code '1234'

  4. Locate and open 'Backup & Reset' (Under 'Personal')

  5. Select 'Factory data reset'

  6. Select 'Reset device'

  7. Select 'Erase everything'

The device will reboot and the initial setup will start.

Video:

K2 24'

  1. Press the 2 side buttons

  2. Pull the door/lid

  3. Press and hold the round power button on the left-hand side of the printer (Above the switch).

  4. Select 'Exit Kiosk' on the screen

  5. Enter code '1234'

  6. Go to Settings on the device

  7. Select 'Back up/reset'

  8. Select 'Factory data reset'

  9. Select 'Reset Device'

  10. Select 'Erase Everything'

Video:

Did this answer your question?