Hold the power button

Select Exit Kiosk

Enter PIN code "1234"

Locate and open "Settings"

Select "WLAN"

The toggle should be "ON" and in orange

Connect to your network

Connect an ethernet cable to the appropriate port. (Third port from the left as seen in the left image below)

Press the 2 side buttons

Pull the door/lid

Press and hold the round power button on the left-hand side of the printer (Above the switch).

Select "Exit Kiosk" on the screen

Enter code “1234”

Go to Settings on the device

Go to Connections/WIFI

Make sure the device is connected to a network

Go back to the home screen

Open the app "Kiosk"

Connect an ethernet cable to the appropriate port. (Middle port)

Press and hold the power button on the right hand side.

Select "Exit Kiosk" on the screen

Enter code “1234”

Go to Settings on the device

Go to Connections/WIFI

Make sure the device is connected to a network

Go back to the home screen

Open the app "Kiosk"

Connect an ethernet cable to the appropriate port. (Third port from the left as seen in the left image below)